Anatomy of a Probe Station System The probe station system is divided into a manual probe station and an automatic probe station. Below we mainly analyze the manual probe station: Probe station use: The manual probe station is also known as the probe test station. The main purpose is to provide a test platform for the electrical parameter test of semiconductor chips. The instrumen

How the manual probe station works Manual probe station use: The main purpose of the manual probe station is to provide a test platform for the electrical parameter testing of semiconductor chips. The probe station can absorb a variety of chip specifications, and provides multiple adjustable test pins and probe holders, which can be used to complete integrated circuits with measu

Optical platforms, also known as optical breadboards, optical tabletops, scientific desktops, and experimental platforms, provide a level and stable tabletop. Generally, platforms need vibration isolation and other measures to ensure that they are not disturbed by external factors and allow scientific experiments to proceed normally. At present, there are two main categories: active and passive

自动平衡型气浮防震桌的安装手册 1、 常规配置 2、 安装前请注意以下几点： （1） 避免阳光直射和较大的温度变化 （2） 只能使用压缩空气或者4Kgf/㎠以上压力的氮气 （3） 避免意外撞击防震桌 3、 安装和调整 请按照以下顺序安装 （1） 移动和装载 a、 移动蜂窝平台和框架至要求安装的地方 b、 把蜂窝平台放在框架上（调整蜂窝到框架的中心位置） （2） 调整框架的水平位置和装载设备 a、 拧松校平脚上的锁紧螺母之后，用扳手（30mm）转动校平脚直到地面和轮脚之间的间距在5mm左右 b、 通过旋转校平脚使框架达到水平 c、

Use of probe station 1. Load the sample into the vacuum chuck and turn on the vacuum valve control switch to make the sample securely and firmly adsorbed on the chuck. 2. Use the chuck X-axis / Y-axis control knob to move the chuck platform, and see the sample clearly under the microscope's low magnification objective lens. 3. Use the chuck X-axis / Y-axis control knob to move the ch